Snell VEGA-16MV User Manual Download Page 139

Page: 139 / 260

Vega-MV Router Multiviewer - User Manual

Issue 1 Revision 2

Page 139

Object Menu

Web Interface 7.6

7.6.14 Edit Object - Properties, Logo Tab (Logo object)

This tab only exists in tiles that are of Logo type.

Figure 101 Edit Object - Properties - Logo Sub-Tab

Setting

Description

File name

Select one of the logo files from the drop down list. The selected logo
will be scaled to fit the tile dimensions.

See section 10.2 for details of uploading graphics files to the Vega-MV
unit.

Notes

•

Graphics files must be in png format.

•

There is approximately 200MB of storage available on the MV-CTL card for pictures.

Table 55

Edit Object - Properties - Logo Sub-Tab

Summary of Contents for VEGA-16MV





































































































































































































































































Search results

Summary of Contents for VEGA-16MV

Reviews:

Snell VEGA-16MV, User Manual, Page: 139 / 260

Search results

Summary of Contents for VEGA-16MV

Reviews: