Snell VEGA-16MV User Manual Download Page 185

Page: 185 / 260

Vega-MV Router Multiviewer - User Manual

Issue 1 Revision 2

Page 185

Uploading Graphics Files

Maintenance Tasks 10.2

10.2 Uploading Graphics Files

Graphics files may be uploaded to the Vega-MV unit MV-CTL card and assigned as logo tile
objects and backgrounds for display.

Uploading the files is performed using a PC connected to the Vega-MV unit’s MV-CTL LAN
port(s) directly, or over a network.

Use a client FTP program such as “FileZilla” or “SmartFTP” to open an FTP
connection to the Vega-MV unit.

Username

: root

Password

: smv

Open the

Logos

directory and copy the graphics file to the

Logos

directory.

The file transfer will begin.

When the upload is complete, restart the Java applet to update the Logo file list.

Note:

•

Graphics files must be in png format.

•

There is approximately 200MB of storage available on the MV-CTL card for
pictures.

Note:

The IP addresses of the MV-CTL card(s) and the PC must be in the same range. If
necessary, the IP address of the frame can be changed using the setup utility.

Summary of Contents for VEGA-16MV





































































































































































































































































Search results

Summary of Contents for VEGA-16MV

Reviews:

Snell VEGA-16MV, User Manual, Page: 185 / 260

Search results

Summary of Contents for VEGA-16MV

Reviews: