IQMDMO
SECTION 40b
IQMDMOOPS 150403 Version 1 Issue 2
40b.31
◀
Options…
This field controls what happens on the
corresponding output when there is no signal
available for that output.
Options
Auto Tone
Auto mute
Auto disable
Tone
Mute
Disable
◀
Auto tone
If no signal is available then the
output produces a valid tone signal
(250Hz tone on the left channel
and 500Hz tone on the right).
◀
Auto mute
If no signal is available then the
output produces a valid digital
mute signal.
◀
Auto disable If no signal is available then the
output is disabled.
◀
Tone
Drive the output with a 250Hz tone
on the left channel and 500Hz
tone on the right.
◀
Mute
Drive the output with a valid digital
mute signal.
◀
Disable
Disables the output.
◀
Status…
Status
PID
Language
Bit rate
Sample rate
This menu allows the status of the selected item to
be displayed.
◀
PID
PID
PID
out 1, 2, 3, 4
OK
◀
Language
Language
Language
out 1, 2, 3, 4
OK
This will display the language, where indicated in
the stream, of the currently selected audio stream
for the corresponding AES/EBU serial output.
◀
Bit Rate
Bit Rate
Bit rate
out 1, 2, 3, 4
OK
This will display the bitrate of the currently selected
audio stream for the corresponding AES/EBU
serial output.
◀
Sample Rate
Sample Rate
Sample rate
out 1, 2, 3, 4
OK
This will display the audio sample rate of the
currently selected audio stream for the
corresponding AES/EBU serial output.
◀
Delay
Delay
Preset
00.0 ms
Delay
This function allows the output delay to be adjusted
so that video and audio signals may be
synchronized.
The delay may be adjusted over a maximum range
of ±1000 ms* in steps of 1 ms.
*Note that the overall adjustment range will depend
on the input stream.
◀
Delay status
Delay status
Delay status
out1,2,3,4_delay_status
OK
This text indicator provides the ‘OK’ / ‘Late’ sync
status.
