IQMDMO
SECTION 40b
IQMDMOOPS 150403 Version 1 Issue 2
40b.23
◀
◀
◀
◀
Options…
Options
Input 1...
Input 2...
This item allows the naming of the ASI inputs and
for the signal to be inverted.
◀
Input 1, 2…
Input 1, 2
Name
Invert auto
Invert off
Invert on
◀
Name
These fields allow the user to assign a name to
each ASI input.
Name
Name
input 1,2_name
Clear
Preset
OK
To compile/edit the text the right
▶
and left
◀
buttons adjacent to the upper text line in the menu
should be used to select the character position in
the text and the spinwheel used to select the
character.
The
◀
Clear
function blanks out the selected
character.
The
◀
Preset
function loads the default text, for
example, Input_1.
O.K.
▶
saves the caption text and returns to the
main menu.
◀
Invert auto
When selected, the corresponding ASI input is
automatically inverted when inversion is detected
on the ASI signal.
◀
Invert off
When selected, the corresponding ASI input is
passed directly through without inversion.
◀
Invert on
When selected, the corresponding ASI input is
manually inverted.
◀
◀
◀
◀
Setup…
Setup
Logging...
Errors...
Video...
Audio embedding...
Memories...
Enable Update
SW version
HW version
Serial No
Preset unit
◀
◀
◀
◀
Logging…
This menu controls the generation of messages to
be logged by a RollCall logserver somewhere on
the network (see RollCall user manual).
The menu consists of a list of all the possible
events that can trigger a RollCall log message.
Each can be individually enabled or disabled by
checking or clearing the associated check box.
The logging sub-menu allows the following
information to be made available for logging:
Logging
All fields
Input 1 loss
Input 2 loss
Input used
Video standard
Ref input
Ref standard
◀
All Fields
This control enables / disables all the other logging
categories
Input 1 loss
This logs the loss or acquisition at
input 1.
Input 2 loss
This logs the loss or acquisition at
input 2.
Input used
Logs changes of input being used
Video standard This controls logging of the video
standard in use: 625/525
Ref input
Logs the reference input and
records:
OK or LOST or MISMATCH.
Ref standard
Logs the reference standard and
records:
625 or 525 or UNKNOWN.
