IQMDMO
SECTION 40b
IQMDMOOPS 150403 Version 1 Issue 2
40b.12
LOGGING MENU
Logging
This menu group controls the generation of logging
messages to be sent to a RollCall logserver
somewhere on the network (see RollCall user
manual).
The menu consists of a list of all the possible
logging events that can trigger a RollCall log
message. Each can be individually enabled or
disabled by checking or clearing the associated
check box.
The following categories are listed:
All errors
This control enables / disables all the logging
categories.
Input 1 (or 2) loss
Logs the loss or acquisition at the inputs.
Input used
Logs changes of input being used
Video std
This controls logging of the video standard in use:
625/525
Ref input
Logs the reference input when in use and records:
OK / LOST / MISMATCH.
Ref std
Logs the reference standard when in use and
records: 625 / 525 / UNKNOWN.
Error status
This group shows all the errors that can be
recorded, together with their current status. A
checkbox associated with each error, enables or
disables the recording of that error type.
There are four error states:
•
Present
-error present within last second,
•
Within minute -error occurred within last minute,
•
Within hour
-error occurred within last hour,
•
OK
-no recent errors
The current error status is also shown on the three
error LEDs at the module edge.
All errors
This status is the logical OR of all the other
categories, whilst this checkbox enables / disables
all categories.
Input
Error occurs when the input signal is not available.
MPEG lock
Error occurs when MPEG lock is lost.
Video ref lock
Indicates loss of video reference lock.
Video ref mismatch
Indicates video reference type is different to input
signal.
Clear errors
Clears error conditions and error LEDs.
