IQGBE Modules
www.snellgroup.com
IQGBE Modules
Issue 1 Rev 1
Page 25
©
2013 Snell Limited
2.17 System-RollTrack Screen
The RollTrack settings allow information to be sent, by means of the RollCall network, to other
compatible units on the same network.
Use the settings on the RollTrack screen to:
•
Enable or disable the RollTrack functions.
•
Configure up to 16 RollTrack outputs.
•
Specify the conditions that trigger RollTrack data transmission.
•
Set RollTrack destinations.
•
Specify the RollTrack commands to be sent.
SFP_1_RX_POWER
to
SFP_2_RX_POWER
<Rx SFP 1 power>
to
<Rx SFP 2 power>
-4.1dBm
Log Field
Log Description
Log Value (example)
Table 9.
Log Table
Fig 25. RollTrack Screen
