IQGBE Modules
www.snellgroup.com
IQGBE Modules
Issue 1 Rev 1
Page 19
©
2013 Snell Limited
For IQGBE80, Port1-8 Names may be edited:
Table 7. describes the Setup screen for the IQGBE40 (Fig 17.) and the IQGBE80 (Fig 18.)
Fig 18. IQGBE80 RollCall Setup Screen
Screen Section
Description
Product:
The top left part of the screen shows the various versions, options,
identifiers, etc., associated with the product's hardware, firmware and
software and also provides a means of setting controls to defaults or
restarting the unit.
Serial No.:
Displays the unit serial number. See Set Board Info Screen for details on
setting this.
Restart:
Use this to restart the unit, simulating a power-up/power-down cycle.
Factory Defaults:
Use this to reset all of the unit's settings to their factory defaults.
Port Name 1-8 (IQGBE80) & 1-4 (IQGBE40):
The bottom half of the screen has entry fields for 8/4 Port Names. These are the Ports
displayed in logging.
To change a name, type the name in the text field and click on the
S
button. To return the
name to its factory default, click on the
P
button.
Table 7.
Setup Screen Information
