IQGBE Modules
www.snellgroup.com
IQGBE Modules
Issue 1 Rev 1
Page 15
©
2013 Snell Limited
2.10 Rear LED Status
Port & power status is also provided at the rear to aid confidence indication when installing
network links.
See Fig 10. for LED location and Table 6. for LED operation.
2.11 Controlling the IQGBEXX from the RollCall Control Panel
2.11.1 Port Summary
Information about the status of the unit ports is displayed in the Port Summary section on
each RollCall Control Panel screen.
The screen shows the link status for each of the unit's ports - after headings 1-4 (IQGBE40)
or 1-8 (IQGBE80) as shown in Fig 11.-
For each port, the link status displayed will be either:-
•
DOWN - link is down
•
UP-10 - link is up, speed is 10Mbps
•
UP-100 - link is up, speed is 100Mbps
•
UP-1000 - link is up, speed is 100Mbps
Fig 10. Rear Panel LED Status
LED
Description
Copper & Fiber interfaces:
Link/Act
Link status is indicated by the green led being on. Activity is represented by the
LED flashing
Gb Rate
When the link is operating at 1000Base-T/X the yellow LED is lit.
Power
Power is OK when the green POWER LED is lit.
Table 6.
Rear Panel LED Status
Fig 11. IQGBE40 & IQGBE80 RollCall Port Summary Screens
Note:
when an SFP is not fitted, that port's status will be shown in this screen as DOWN.
