background image

SHDFTRM

OPERATION

System HD Multi-Rate Optical Transceiver

Operation Manual

SHDFTRM

Version 1 Issue 1

180203

1

CONTENTS

INTRODUCTION TO THIS INSTALLATION
MANUAL................................................................ 2

SCOPE OF THIS OPERATION MANUAL ............ 4

MODULE DESCRIPTION ................................. 4

FEATURES............................................................ 6

TECHNICAL PROFILE.......................................... 7

TRANSMITTER INPUT..................................... 7

Active Loop-through..................................... 7

TRANSMITTER OUTPUTS .............................. 7
RECEIVER INPUT............................................ 7
RECEIVER OUTPUTS ..................................... 7
SWITCHES, BOARD EDGE ............................. 7
INDICATOR LEDS............................................ 7
ROLLCALL

.................................................... 8

OPTIONS.......................................................... 8

REAR INTERFACE CONNECTIONS.................... 9

REAR INTERFACE NOTATION GUIDE........... 9
STANDARD AND WDM TRANSMITTER
INPUT ............................................................. 11
STANDARD AND WDM TRANSMITTER
ELECTRICAL LOOP-THROUGH ................... 11
STANDARD TRANSMITTER OUTPUTS ....... 12
OPTICAL HD-SDI OUTPUT – QUAD
OUTPUT OPTION .......................................... 12
OPTICAL HD-SDI OUTPUT – DUAL
OUTPUT OPTION .......................................... 12
OPTICAL HD-SDI OUTPUT – SINGLE
OUTPUT OPTION .......................................... 12
WDM TRANSMITTER INTERFACES............. 13
STANDARD RECEIVER INPUT ..................... 13
STANDARD AND WDM RECEIVER
OUTPUTS....................................................... 13
WDM COMBINED RECEIVER INPUT AND
OPTICAL TRANSMITTER OUTPUT .............. 14

ROLLCALL MENU SYSTEM .............................. 15

ROLLCALL MONITORING FEATURES ......... 16

Summary of Contents for SHDFTRM0WQ0


















Reviews: