![background image](http://html1.mh-extra.com/html/snell-and-wilcox/premier-hd-hd2200/premier-hd-hd2200_installation-and-operators-manual_1309057019.webp)
HD2200
SECTION 4
HD22 14/03/01 Version 1 Issue 2
4.2
GENERAL OPERATING INFORMATION
Display Window
The control window displays all selection menus
sub-menus and unit status information.
Home Display
An example of unit status is shown in this case
indicating that the unit is set to accept a 750
progressive signal (720 active lines) at 59.94Hz
frame rate and the output signal is selected to be
525 SDI at the same field rate. The unit is not
currently locked to a reference.
If the input is not available the words Input Loss!
will be displayed and the output will be determined
by the set up.
The following warning messages may appear to
the right of the vertical line:
Pattern, Freeze, Mono,
The
Home
button always allows a return to
the home status screen in the display window from
any position in the menu hierarchy.
The
Preset
button will return all settings of
the displayed menu to factory or display memory
default settings.
The
Back
button allows a return to the last
menu screen that was displayed. Up to 32 menu
screens may be retraced using this function.
Using The Control Push Buttons
Various specific operations may be carried out by
using these push buttons to access particular
functions.
When pressed the relevant menu will appear in the
display window and the button LED will become
illuminated, indicating that the function is active.
Display Window
In 750(720)/59p
Ref Free
Run
Out 525 (480) / 29i