HD2200
SECTION 3
HD22OP271100 Version 1 Issue 1
3.2
Environment
Although ruggedly constructed to meet the normal
environmental requirements, it is important that
there is a free flow of air at the front, left-hand side
(looking from the front) and rear to dissipate the
heat produced during operation. Installations
should be designed to allow for this.
Remote Control
The unit may be controlled via the RollCall remote
control system from an active front panel.
OPENING THE FRONT PANEL
Open the front panel by turning the black knob at
the right-hand end a half-turn anti-clockwise and
then hinging the panel open to the left.
The rack mount fixing “ears” are revealed when
the panel is open.
Refit the front panel by hinging it back into position
and turning the black retaining knob.
Internal View Showing Power Supply and Card Position
HIO Card
VTI Card
Power Supplies (1 or
optionally 2)
