SNBC BTP-R880NP Programming Manual Download Page 3

Page: 3 / 78

Confidential BTP-R880NP Programming Manual

- 2 -

Declaration

If you need this manual, please comply with the Clause as below.

If you disagree with it, please return this manual immediately.

This manual contains the private confidential information belonging to ORIENT Technologies bv

(hereinafter referred to as “ORIENT Technologies”) and Shandong New Beiyang Info-Tech Co., Ltd.

(hereinafter referred to as SNBC). You must keep its relative content as the confidential information. If

the users are commercial customers or entities, you should be aware to disclose it to those people

with the confidential responsibility including your employees, agencies and partners. When you

terminate the cooperation with ORIENT Technologies and SNBC or bring about your request, you

have to stop using this manual and return it to ORIENT Technologies or SNBC, or destroy the

confidential information.

If any relative organ such as court, arbitrator or government authority requests you to disclose any

confidential information of this manual, you must inform ORIENT Technologies or SNBC quickly and

also agree that you shall cooperate or assist with ORIENT Technologies or SNBC reasonably during

the negotiation.

ORIENT Technologies or SNBC has the right to disclose its confidential information and does not be

responsible for the loss or damages caused from the wrong usage or reference of this manual by

users.

Information in this document is subject to change without notice, which is only used for product

maintenance or service relative to this manual. ORIENT Technologies and SNBC reserves the right to

improve products as new technology, components, software, and firmware become available. If users

need further data about the products, please feel free to contact ORIENT Technologies or SNBC.

No part of this document may be reproduced or transmitted in any form or by any means, electronic

or mechanical, for any purpose without the express written permission of ORIENT Technologies or

SNBC.

Printed in China

Trademarks

Our registered trademarks are

In CHINA:

Address:

No.169 Huoju Rd, Weihai, Shandong, China. 264209

Hot line:

+86-631-5673777

Fax:

+86-631-5673778

Summary of Contents for BTP-R880NP















































































Search results

Summary of Contents for BTP-R880NP

Reviews:

Related manuals for BTP-R880NP

Brands by name

Popular brands

SNBC BTP-R880NP, Programming Manual

Search results

Summary of Contents for BTP-R880NP

Reviews:

Related manuals for BTP-R880NP

Brands by name

Popular brands