Snazzi SN1510-A5, Operating Instructions Manual

Page: 99 / 106

<<
99
>>
7.
According to the steps above, you can complete learning all the keys of the physical remote control. While you
are learning one key but net-TV Box doesn’t receive the IR signals, it will show the fail message. Then you
merely need to click the key and learn again.
8.
After learning all the keys, click the
「
Stop Learning
」
button and
click
「
Finish
」
to return to the player.
Then you can control the corresponding video device with
on-screen remote control panel remotely.
On the on-screen remote control, the keys which have been
learned are shown in white and those which have not been learned
are shown in gray.
✍

While learning keep the distance between the remote control and net-TV Box within 5cm and you are
recommended to shade the light between them.

The Box only supports remote controls with 38~40 KHz carrier wave, and doesn’t support remote controls with
48~64 KHz carrier wave.

Please don’t use or move the devices with IR function far away.

Different video devices correspond to different IR learning tables. One IR table can only be used to control the
corresponding video device.

If some keys in the IR table of box are incorrect, you can select “modify” then go to the start learning page and
learn the incorrect keys again.