Snazzi SN1510-A5, Operating Instructions Manual

Page: 100 / 106

<<
100
>>
Upload to box
If your Box reset to factory default because some causes, the IR learning table in it will be clear up. In order to
avoid repeating IR learning process, you can upload the IR table saved in PC to the Box. If you have more than
one Box connected to same video device, you can also upload the IR table to other Box.
1.
Select
「
Upload to box
」
in the IR table main page, then click
「
Next
」
.
2.
Select the IR learning table (*. rpl) that you want to upload in the
pop up dialog.
Generally the IR learning table is saved in the folder named by
each box ID under the UserData folder in the application install
directory.
✍
The on-screen remote control controls the video device according to the IR table saved in the box. So you
connect other video device to box, you have to upload the corresponding IR table to control it.