Snazzi SN1510-A5, Operating Instructions Manual

Page: 83 / 106

<<
83
>>
If you select PPPoE network configuration, after finish the
information input and click
「
Finish
」
button, it will notice
you connect net-TV Box to ADSL Modem and replug in the
power source.
Please plug out the Ethernet Cable from the computer
which is connected to net-TV Box and reconnect it to the
xDSL Modem that has been set.
Plug on the power of net-TV Box after the Ethernet Cable is
properly connected. Please notice the order of the two
steps: Connect Ethernet Cable first, then plug on the
power. Then the PWR led of the net-TV Box will turn
constant on, you should notice whether the NET led is on
afterwards. If so, congratulate that you have installed
successfully, if not, please retry by above steps.
Port Forwarding:
The default setting is UPnP. If the effect of automatic port isn’t satisfying, you can set AV port for yourself.
If the router supports UPnP, please don’t select DMZ or Virtual Server. If you select the item (only available under
LAN) you have to enter the corresponding ports in the following fields when set to DMZ or Virtual Server. (Please
refer to instructions of router.)