background image

32

2 YEAR LIMITED WARRANTY

For two (2) years from purchase date for the original purchaser's use, 

SNAPPER

, through any authorized 

SNAPPER

dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the
factory at McDonough, Georgia, to be defective in material or workmanship or both.

For ninety (90) days from purchase date for the original purchaser's rental use, 

SNAPPER

, through any authorized

SNAPPER

dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon exami-

nation by the factory at McDonough, Georgia, to be defective in material or workmanship or both

All transportation costs incurred by the purchaser in submitting material to an authorized 

SNAPPER

dealer for replace-

ment under this warranty must be paid by the purchaser.

This warranty does not apply to transmissions, to engines and their components, and batteries, as these items are war-
ranted separately. This warranty does not apply to parts that have been damaged by accident, alteration, abuse, improp-
er lubrication, normal wear, or other cause beyond the control of 

SNAPPER

. This warranty does not cover any machine

or component that has been altered or modified, changing safety, performance, or durability.

Batteries have a one (1) year warranty period with free replacement if required for one (1) year from the original pur-
chase date. 

SNAPPER

will not be responsible for any installation cost incurred. The battery warranty only covers origi-

nal equipment batteries and does not cover damage to the battery or machine caused by neglect or abuse, destruction
by fire, explosion, freezing, overcharging, improper maintenance, or use of improper electrolyte.

There is no other express warranty.

DISCLAIMER OF WARRANTY

Implied warranties, including those of merchantability and fitness for a particular purpose, are limited to two (2)
years from purchase date for the original purchaser's non-rental use, and ninety (90) days from the purchase
date for the original purchaser's rental use, and up to the extent permitted by law and all implied warranties are
excluded. This is the exclusive remedy. Liabilities for consequential damages, under any and all warranties are
excluded.

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or lim-
itation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

WARNING: THE USE OF REPLACEMENT PARTS OTHER THAN GENUINE SNAPPER PARTS MAY IMPAIR THE
SAFETY OF SNAPPER PRODUCTS AND WILL VOID ANY LIABILITY AND WARRANTY BY SNAPPER ASSOCIAT-
ED WITH THE USE OF SUCH PARTS.

IMPORTANT:

Please fill out the attached 

SNAPPER

Product Registration Card immediately and mail to:

Snapper's Product Registration Center

, P.O. Box 1379, McDonough, Georgia. 30253

Summary of Contents for CZT19481KWV









































Reviews: