SnapAV WPS-ACC-PTZ-CTRL, User Manual

Page: 10 / 20

10
PTZ Camera Lens Control
To zoom the selected camera in, press the Tele button on the keyboard.
To zoom the selected camera out, press the Wide button on the keyboard.
To focus the camera on a distant object, press the Far button on the keyboard.
To focus on an object close at hand, press the Near button.
Note: If the camera is set to auto-focus, the camera’s zoom and focus may
change based on the movement of objects within the camera’s field of view.
Creating a Surveillance Pattern
Your controller can generate up to three surveillance motion patterns for each
camera in your array. These patterns are stored locally in your cameras.
These patterns are numbered 1–3. To create a pattern, follow these steps:
1. Press
Set .
2. Press the pattern number (1–3).
3. Press
Pat .
4. Use the joystick to move the camera through the desired pattern.
5. Press
Set .
6. Press 0 .
7. Press Pat .
The pattern is then saved under that number and can be engaged as desired.
Engaging a Surveillance Pattern
To run a pattern that you have previously created, press the pattern number
(from 1–3), then press Pat . The active camera will then begin using that pattern.
Opening the PTZ Camera Menu
To access the PTZ camera’s internal menu, press 9 , 5 , Pre . This calls the main
menu of the camera, and the menu is displayed in the camera’s video output
display.
The contents of the camera’s main menu vary based on manufacturer and
model. Consult your camera’s documentation for details.