15
Set Dome Pattern Menu
A pattern is a regular system of movement that a camera uses to cover a wide
area. Wirepath PTZ cameras (WPS-750-PTZ-A and WPS-500-PTZ-A) support up to
three patterns.
Selecting a Pattern to Edit
From the Dome Setup menu, choose:
3. Set dome pattern
1. Pattern num:
Enter a number from 1–3 to indicate which pattern you wish to edit, then press
Ent
. Notice that the LCD now shows the pattern you are editing after the colon.
Recording a Pattern
Once you have selected a pattern to edit (see above), then choose:
3. Set dome pattern
2. Set pattern
Press the
1
key to start recording the pattern. The LCD will read
Start
.
Move the camera through the motions you want it to make. All pan, tilt, and
zoom commands will be recorded, as will all pauses. Every movement (and lack
thereof) is recorded.
When you have completed moving the camera through its desired motions,
press 0 to stop recording the pattern. It is not necessary to return the camera to
its starting location. If the LCD displays
Success!
and takes you back to the Set
Dome Pattern menu, then the pattern has been saved successfully.
Running a Pattern
From the Dome Setup menu, choose:
3. Set dome pattern
3. Run pattern
Enter the pattern number you wish the camera to follow. The camera will view
the area using the designated pattern of motions until you activate a new
mode or take manual control of the camera.
Summary of Contents for WPS-ACC-PTZ-CTRL
Page 7: ...7...
