23
Luma 500/700 Series Dome IP Camera
Calibrate the Camera’s Clock
Click on
System Settings > Time Settings.
Synchronize the Time
At the top, choose your time zone.
By default, the system uses network time protocol (NTP) to synchronize
your system to Coordinated Universal Time.
We strongly recommend
using NTP to keep your system well calibrated.
If you want to use manual time sync, or if your system is isolated from
the Internet, see the camera web interface manual (available online).
Disable DST if Necessary
If you are in a location that does not observe daylight saving time, click
the
Enable DST
checkbox to deselect it.
Click
Save
to confirm changes.
