background image

           SAFETY INSTRUCTIONS

1.

 CAUTION – To reduce the risk of fire, the appliance is to be installed in non-combustible surroundings 

    only, with no combustible material within 18 inches of the sides, front, or rear of the appliance or 
    within 40 inches above the appliance. The appliance is to be mounted on floors of noncombustible 
    construction with non-combustible flooring and surface finish and with no combustible material 
    against the underside, or on noncombustible slabs or arches that have no combustible material 
    against the underside. Such construction shall in all cases extend not less than 12 inches beyond 
    the equipment on all sides.

2. 

IMPORTANT:

 Clean machine thoroughly before first use and after all uses, using cleaning instructions below.

3. 

IMPORTANT:

 Incoming power MUST be the same as the equipment’s rating. Refer to the Electrical Ratings 

    listed on the equipment’s Data Tag located on the back of the unit.
4. 

CAUTION:

 This Hot Dog Roller’s power cord is equipped with a GROUNDED, 3-prong power cord.  

   Plug only into a matching, grounded outlet. DO NOT cut or break off the third prong. Operating this  
   equipment without proper grounding may result in electric shock.
5. 

CAUTION:

 Always disconnect Power when not in use and before cleaning or servicing.

6. 

CAUTION:

 Do not operate with a damaged cord or plug or after the machine malfunctions, has been dropped 

    or damaged. Use authorized service for examination, electrical or mechanical adjustment or repair.
7. 

CAUTION:

 Equipment surfaces are HOT during use and for a short time after disconnecting the power.  

    Allow to cool before moving or servicing.
8. 

WARNING:

 DO NOT immerse in water or other liquid. DO NOT clean with water jet. SEVERE personal injury  

    or death can result.
9. 

CAUTION:

 Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may 

    cause an electrical shock, fire or damage to the appliance. Do not block air intakes or exhaust in any 
    manner. Do not use on soft surfaces where openings may become blocked.

CAUTION!

W2.5cm

Hot surface. 

Do not touch.

L 5cm

Summary of Contents for SSX19P153









Reviews: