HOW TO USE YOUR HOT DOG ROLLER
IMPORTANT!
Avoid using non-stick sprays because these can contain lecithin, which will cause an eventual buildup on
your rollers.
To use your machine:
1. Turn the power switch and warming drawer switch to ON. Indicator lights will illuminate when on.
2. Turn the temperature control dials to the desired settings. To cook product more rapidly, turn the
temperature dials to their highest settings, or in a clockwise direction. To cook more slowly, or to
hold already-cooked product on a warm setting, adjust the temperature dial down, or in a
counterclockwise direction.
In addition, the orange indicator lights will be lit when the rollers and warming drawer are actively
being heated; when they have reached the temperature set by the temperature dials, the lights will
go out. Increasing the temperature setting for a group of rollers will cause the indicator light to go on
and when the new temparture is reached the light will extinguish to let you know that the new setting
is reached.
CAUTION!
Rollers will be hot. Use care when cleaning, adding product or serving product!
CLEANING & MAINTENANCE
IMPORTANT!
Do not immerse any part of this machine in water. Turn the machine OFF prior to cleaning or maintenance
and allow to cool before touching rollers.
CAUTION! Rollers will be hot.
Follow the cleaning and maintenance guidelines to ensure a long life for your machine.
To clean your machine:
1. Turn the power switch and warming drawer switch to OFF, and allow to cool.
2. Use a soft cloth or towel to wipe the surfaces of the rollers. DO NOT USE METAL TO CLEAN YOUR ROLLERS!
This may result in damage to the machine. In most cases the natural oils exuded from sausages or hot
dogs will keep the machine well lubricated. You should simply need to wipe the rollers and outside
surfaces of your machine with a cloth to remove excess oils or dust. Should you need to remove any
caked-on material such as cheese or condiments, use a wooden utensil and then clean with a soft cloth.
3. Remove pull-out drip tray and clean with soap and water in the sink.
4. To remove warmer drawer pull drawer outward until fully open then firmly lift upwards on rear right side of
drawer until roller bearing pulls out of channel guide, and pull drawer completely out. Clean with soap
and water in the sink. To install drawer, position left rear drawer roller bearing directly behind cabinet
channel roller bearing. Then position right drawer roller bearing resting on the top rear side of the right
channel roller bearing. Firmly press downwards until drawer bearing aligns within channel.
