15
Getting Started
Powering Down
3.2.2 The Demonstration Program
The Scanner demonstration program allows you to become familiar with many of the test
capabilities of the tool without connecting to a vehicle. The demonstration contains actual data
captured while driving a 2001 Chevrolet Tahoe.
z
To start the demonstration program:
1. From the Home screen, tap the
Scanner
icon.
The manufacturer menu, which lists all of the makes available for testing, displays.
2. Tap the
Demonstration
button included on the manufacturer menu.
3. A screen advising you are in simulation mode displays, select
Continue
.
IMPORTANT:
Do not connect a vehicle to the scan tool while in the Demonstration mode.
4. Follow the on-screen instructions and select as needed until the confirmation screen displays.
5. Select
OK
on the confirmation screen to load the selected database.
6. Select
OK
from the Demo mode message screen.
A systems menu, which shows all of the systems available for testing, displays
7. Select from any of the systems listed, then select from the submenus.
NOTE:
i
There is also an OBD-II/EOBD demonstration, select “
OBD Training Mode
” in OBD-II/EOBD.
3.3 Powering Down
Use the
Power
key to turn the scan tool off.
IMPORTANT:
All vehicle communication must be terminated before shutting down the scan tool. A warning
message displays if you attempt to shut down while the Scanner is communicating with the
vehicle. Forcing a shut down while communicating may lead to ECM problems on some vehicles.
Exit vehicle communications before powering down.
z
To power off the unit:
1. Press
N/X
or
Back
until you reach the Home screen.
A “stopping communication” message appears briefly before the Home screen displays.
2. Disconnect the test adapter from the vehicle connector.
3. Press the
Power
key.
The Turn off dialog box displays.
4. Press
Y/
a
to turn the power off, or press
N/X
to cancel and test a different vehicle.
3.3.1 Emergency Shutdown
In case of emergency, press and hold the Power key to force a shutdown.
