Snap-On POLARTEK HYBRID EEAC332 Manual Download Page 34

Page: 34 / 44

• 34 •

MAINTENANCE REPORT

From MAINTENANCE, select MAINTENANCE REPORT, the
following screen will be displayed:

Press PRINTER to print a maintenance report:



Serial number.



Total amount of recovered refrigerant.



Total running time of the vacuum pump.



Filter change detail

SERVICES ARCHIVE

Refer to SERVICES chapter.

TANK CELL CHECK

From MAINTENANCE, select TANK CELL CHECK, the following
screen will be displayed:

Wait few seconds, paying attention not to touch the machine,
then the following screen will be displayed:

Attach the reference weight to the magnet on the rear of the
machines and press ENTER. The following screen will be
displayed:

Wait few seconds, then if the tank cell is correctly calibrated the
following screen will be displayed:

Press ENTER to return to MAINTENANCE MENU

R134a

MAINTENANCE REPORT

FILTER CHANGE
mm/dd/yy     xx lbs
mm/dd/yy     xx lbs
mm/dd/yy     xx lbs

PREV

PAGE

NEXT

PAGE

TANK CELL CHECK

CHECK OK

Press ENTER to continue

R134a

MAINTENANCE

TANK CELL CHECK

TANK CELL CHECK

Don't touch the machine!

please wait...

R134a

MAINTENANCE

TANK CELL CHECK

TANK CELL CHECK

Attach the reference weight

to the magnet on the rear of the

machines and Press ENTER

R134a

MAINTENANCE

TANK CELL CHECK

TANK CELL CHECK

Don't touch the machine!

please wait...

R134a

MAINTENANCE

TANK CELL CHECK

Summary of Contents for POLARTEK HYBRID EEAC332













































Search results

Summary of Contents for POLARTEK HYBRID EEAC332

Reviews:

Related manuals for POLARTEK HYBRID EEAC332

Brands by name

Popular brands

Snap-On POLARTEK HYBRID EEAC332, Manual

Search results

Summary of Contents for POLARTEK HYBRID EEAC332

Reviews:

Related manuals for POLARTEK HYBRID EEAC332

Brands by name

Popular brands