Snap-On POLARTEK HYBRID EEAC332, Manual

Page: 25 / 44

• 25 •
EDIT CHARGE MODE
Select the connection mode:

HP+LP fill the refrigerant from both HP and LP service
ports.

HP to fill the refrigerant only from the HP service port.

LP to fill the refrigerant only from the LP service port.
START PROCEDURE
After all CHARGE data is selected, press ENTER to continue, the
following screen will be displayed:
Type the plate of the car, press ENTER to confirm. ESC to return
back.
NOTE: the numerical keys include an alphabet that is used
similar to text messaging; for example: press “2” once to display
“2”, twice to display “A”, three times for “B”, four times for “C”, five
times for “a”, six times for “b”, seven times for “c”, eight times for
“2” again.
Connect and open the coupling (HP, LP, or HP/LP, depend of the
previous choice) connected to the A/C system, then press ENTER.
Press ESC to return back.
The machine will start the charge with the preset quantity of
refrigerant.
Then the following screen will be displayed :
Disconnect HP coupling. Start A/C system with LP coupling
connected, press ENTER.
The A/C system will recover the refrigerant into the service hoses,
then the following screen will be displayed:
Disconnect LP coupling, then press ENTER to continue:
The machine will recover the residual refrigerant into the service
hoses, then the following screen will be displayed
:
Procedure is now successfully completed.
Press PRINTER to print the receipt of the procedure. Press ENTER
to exit.
R134a MANUAL PROCEDURE
xx psi
EMPTY HOSES
Empty hoses
Hoses pressure
R134a MANUAL PROCEDURE
CHARGE
Disconnect LP coupling, from A/C system and
Press ENTER
Disconnect HP coupling Start A/C system with LP
coupling connected and press ENTER
R134a MANUAL PROCEDURE
CHARGE
R134a MANUAL PROCEDURE
EMPTY HOSES
End Of Procedure
gas charged xxx lb
Press ENTER to continue
Gas charged
Tank Pressure
A/C pressure
Tank temperature
R134a MANUAL PROCEDURE
CHARGE
lb
psi
psi
°F
Connect and open HP and LP coupling to A/C
system Press ENTER
R134a MANUAL PROCEDURE
CHARGE
Inset vehicle
Plate number:
___________________
R134a MANUAL PROCEDURE
CHARGE
1 2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
0
|_|
← .,
EMPTY HOSES