Scanner
Features and Icons
13
4.2.3 Basic Scanner Operation (Quick Start)
This section lists the basic scanner operation steps, and is only intended as a
quick-start reference. Refer to the supporting topics in this section for detailed
operation information.
z
Getting Started (Basic Steps)
NOTE
Menus, options and procedures will vary across motorcycle manufacturers
and models.
1.
Select
Scanner
from the Home screen.
2.
Follow the prompts to identify the motorcycle (e.g. make, year, model), then
select
OK
to confirm.
3.
Follow the onscreen instructions to connect the
DA-5
data cable and
Smart
Vehicle Interface
(SVI) to the motorcycle diagnostic connector. See
.
4.
Turn the ignition on and move the “run” switch to on, or start the engine.
NOTE
Ensure the LEDs on the SVI and DA-5 cables are on when establishing
communication between the motorcycle and diagnostic tool.
5.
Follow the prompts to select a
System
(e.g. Engine, ABS, Radio).
6.
Select a
Function/Test
(e.g. Codes Menu, Code Scan, Data Display,
.
NOTE
When the diagnostic tool is communicating with a motorcycle an icon is
displayed in the title bar.
4.2.4 Data Cable Connection
NOTE
On-screen data cable connection instructions are provided.
As an example,
shows a typical data cable connection using the supplied
DA-5 data cable and the Harley-Davidson HAR-2 Smart Vehicle Interface (SVI),
other manufacturers are similar.
Figure 4-2
NOTE
Contact your sales representative to purchase additional Smart Vehicle
Adapters (SVIs) for other Motorcycle manufacturers.
1.
Follow the onscreen instructions to connect the
Smart Vehicle Interface
(SVI)
to the motorcycle diagnostic connector.
Icon
Function
Indicates active Scanner communication (displayed in title bar)
HAR-2
DA
-5
Smart Vehicle Interface (SVI)
(e.g. Harley-Davidson HAR-2)
DA-5 Data Cable
4 and 6 Pin Connectors
(Harley-Davidson Only)
Application Dependent on Model
To Diagnostic Tool
To Motorcycle Diagnostic Connector
(LED) Power Indicator
(see
Note
below)
