56
Scope Multimeter
Tests and Capabilities (Quick Reference)
a
a
a
Low Amps (40)
Used to measure amperage of typical motors and devices
that may draw up to 40A peak (startup) when initially
started.
a
a
a
Low Amps (60)
Used to measure amperage of larger motors and devices
that may draw up to 60A peak (startup) when initially
started.
a
MC Dwell (60)
Measures carburetor Mixture Control Solenoids (0–60°).
The duty cycle of the solenoid is expressed in the dwell
angle of a 6 cylinder engine: 100% = 60 deg.
a
MC Dwell (90)
Measures fuel system Mixture Control Solenoids (0–90°).
The duty cycle of the solenoid is expressed in the dwell
angle of a 4 cylinder engine: 100% = 90 deg.
a
a
100 PSI Vacuum
Used to measure vacuum up to 20 in.Hg,
using the 0–100 psi transducer
a
a
100 PSI Pressure
Used to measure pressures for typical systems such as,
fuel, oil, EVAP, hydraulic/transmission fluid etc. up to 100
psi, using the 0–100 psi transducer
a
a
500 PSI Pressure
Used to measure pressures for typical systems such as,
hydraulic/transmission fluid pressure, cylinder
compression, and AC high side up to 500 psi, using the
0–500 psi transducer
a
a
5000 PSI Pressure
Used to measure pressures for typical systems such as,
ABS, power steering, and heavy-duty hydraulic system
fluid up to 5000 psi, using the 0–5000 psi transducer
a
a
MT5030 Vacuum
Used to measure vacuum up to 29 in.Hg,
using the MT5030 pressure transducer adaptor
a
a
MT5030 Pressure
Used to measure fluid and gas pressures up to 500 psi,
using the MT5030 pressure transducer adaptor
a
a
EEDM506D Temperature
Used to measure temperatures from -50° to 1800° F
(-45 to 982° C), using the EEDM506D pressure
transducer adaptor
D
M
M
G
M
M
LS
Test
Function
