manualshive.com logo in svg

Snap-On MODIS Edge, User Manual

Share
Download
Snap-On MODIS Edge User Manual Download Page 106

101

Chapter 6

Guided Component Tests

The Guided Component Tests function provides you with an extensive collection of vehicle 
specific component tests and reference information. It is like having access to a complete library 
of automotive repair manuals for testing multiple vehicle components. 

The preconfigured meter tests and reference information provided are vehicle specific and 
designed to help save you diagnostic time, verify faulty components, and verify the repair.

Detailed instructions and reference information are provided to guide you through the testing 
process, from locating the component, to selecting the appropriate test, showing test lead 
connections, and illustrating electrical connector and pin configurations. In addition, test results 
(including waveform examples), procedures, tips, and specifications may also be provided. 

NOTE:

i

Availability of tests and information may vary.

As an added resource, the Extras Menu provides even more support by including (non-vehicle 
specific) tests and resources that allow you to quickly perform common tests, review basic 
reference information and more. 

6.1   Extras Menu (Top Level Menu Items)

The Extras Menu is a companion feature to the Guided Component Tests function. This resource 
includes a wide collection of common (non-vehicle specific) reference information and tests, such 
as measuring fuel pump current ramp, and monitoring CKP and CMP signals simultaneously. Also 
included are, basic component operation and theory information, testing procedures, tips, 
definitions, illustrations, diagnostic tool feature descriptions and accessory information.   

Select the Extras icon (

Figure 6-1

) from the Guided Component Tests home screen to access the 

Extras menu options. Each menu option is described in the following sections. 

•

Power User Tests

‚ on page 102

•

How To Guide

‚ on page 103

•

Features and Benefits

‚ on page 104

Figure 6-1 Extras Icon on Guided Component Tests Home Screen

European

Asian

Summary of Contents for MODIS Edge







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands