USAGE TIPS:
• For most effective cleaning, keep spray nozzle from 8 to 24 inches away from clean-
ing surface.
• If you get spray nozzle too close, you may damage surface being cleaned.
•
DO NOT
get closer than 6 inches when cleaning tires.
PRESSURE ADJUSTMENT
Increase distance:
To vary the pressure on the surface being cleaned, vary the
distance between spray wand and the surface being cleaned.
Change pressure wand nozzle:
Completely shut down Pressure Washer and stop
gasoline engine. Change spray nozzle for desired pressure (see "SELECTING THE
RIGHT NOZZLE"). Restart engine.
USING CHEMICALS AND CLEANING SOLVENTS
Use only soaps and chemicals designed for use with Pressure Washers.
DO
NOT USE CHLORINE BLEACH.
Chemicals, soaps and cleaning solvents will not siphon when a high pressure
nozzle is used. Use the Chemical Nozzle (Black).
TO APPLY DETERGENT:
1. Prepare detergent solution as recommended by the manufacturer.
2. Remove the detergent tank lid located in front of the Pressure Washer.
3. Fill tank with prepared detergent solution. A small funnel
may help with this task. Replace the detergent tank lid.
4.
Turn on the Detergent Tank Valve located behind the
tank.
5. Lock the trigger and attach the Detergent Nozzle (Black) to
the Wand.
6. Unlock the trigger and squeeze spray gun trigger and apply detergent to a dry
surface, starting at lower portion of area to be washed and work upward, using
long, even, overlapping strokes.
Wetting the surface first is not recommended, as it dilutes
the detergent and reduces its cleaning ability.
7. Allow detergent to "soak in" for 3-5 minutes before washing and rinsing.
Reapply as needed to prevent surface from drying. Do
Not
allow detergent to
dry on surface (prevents streaking).
23
OPEN
Summary of Contents for 870599
Page 44: ...42 ...
