Technical Data Sheet FSC-UFC24
Page 6 of 18
November 2017
Technical changes reserved
www.smtec-ag.ch
1. Open the lid
2. Unlock the screw
3. Move the sliding cover
10 mm to the top
a
b
c
1. Open the small lid on the lower end of the housing by flapping up the cover
2. Unlock the screw which is placed on the lower end in the middle
3. Move the sliding cover 10 mm to the top
4. Remove the cover
Lid for Easy Access to Dip Switch Terminals (Configuration / Addressing) and Test Button
The blue coloured dip switch terminal is for the Modbus or BACnet addressing.
The red one for the configuration.
Test button: For detailed explanation of the function of the test button see page 16.
a
b
c
Removing the Cover of the Housing
