background image

ARCNET 5 Port HUB Controller 

 
Datasheet 

 

Revision 1.1 (07-24-07)

 

Page 2

 

SMSC TMC2005-JT 

 

DATASHEET

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

   

80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123 

 
 

Copyright © 2007 SMSC or its subsidiaries. All rights reserved. 

 
Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete 
information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no 
responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without 
notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information 
does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of 
SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's 
standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or 
errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon 
request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure 
could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC 
and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms 
of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems 
Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.  
 

SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES 
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND 
ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY 
DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR 
REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC 
OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD TO 
HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGES. 
 
 
 

Summary of Contents for TMC2005-JT

































Reviews: