User Manual & Instructions
Series: BRM22050
For use with:
2G, 3G & 4G Cellular Devices
The BRM220-50 Dual Band RX/TX 800/1900Mhz
Signal Booster with Smoothtalker proprietary
“ Stealthtech Signal Technology “
Increases your Cellular and PCS Band Signals, expands your service
coverage area, enhances voice call quality
and significantly increases Data speeds
The Intelligent CPU monitors the environment in which the amplifier is operating
and continuously adjusts itself to prevent Oscillation and also automatically
prevents any RX/TX overload to both the Cell Phone and Cellular Tower while
giving you maximum signal improvement. It is easy and simple to install and you
can be up and running in minutes
This is a CONSUMER device BEFORE USE, you MUST REGISTER THIS DEVICE
with your wireless provider and have your provider’s consent. Most wireless providers
consent to the use of signal boosters. Some providers may not consent to the use of
this device on their network. If you are unsure, contact your provider. You MUST oper-
ate this device with approved antennas and cables as specified by the manufacturer.
Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST
cease operating this device immediately if requested by the FCC or a licensed wire-
less service provider. WARNING. E911 locator information may not be provided or
may be inaccurate for calls served by using this device.
Pg. 4
Operational Bands
800MHz Cellular and 1900MHz PCS
Impedance
50 Ohms
Output Power
1 watt EIRP
Oscillation Control (Automatic)
Dynamic 1db steps
Oscillation Control Timing
< 1 sec
RX High Power Control
Dynamic up and down < 50 milliseconds
TX High Power Control
Dynamic up and down < 50 milliseconds
Current Draw @ 12V
1.1 Amp - 1.8 Amp
Operating Voltage
6V
Noise Figure
< 5dB
Operating Temperature
-32F to +85F
Outside Antenna Connector
MCT Male
Inside Antenna Connector
MCT Male
Dimensions
6.25x3.5x1.125 inches
Weight
1.0 Lb
FCC ID
S4RBRM22050
Specifications
Important:
1- Use only the power supply included with the booster. Connecting any other power
supply at any time will result in damage to the booster and will void the warranty.
2- Do not turn on the power switch until ALL cables have been screwed or plugged
into the booster or you can cause damage to the booster.
3- It is the user’s/operator’s responsibility to maintain a minimum distance of 8 inches
separation from the antennas to any person.
Notes:
1- This booster is not user configurable. User changes are a violation under FCC
rules and will void the user’s authority to operate the equipment.
2- User changes changes or modifications will void warranty.
Warranty: 2 Year on manufacturing defects.
Does not include misuse or customer damage.
Original Bill of Sale is required for all Warranty Claims
Contact us at: smoothtalker.com
