12
“
S
EAT
I
NSTALLATION
and
A
DJUSTMENT
”
Warning: Do not use the Smooth XBIKE without verifying that the seat
is locked in place. Before moving or using the bike, pull upward on the
seat to verify it cannot be removed
.
1. Turn the seat adjustment
knob counter-clockwise to
loosen. (do not completely
remove the adjustment knob)
2. Pull back the seat
adjustment knob to
release the seat.
3. While holding the knob out,
move the seat up or down.
There are 7 different seat
positions
. The seat will move
in a 45 degree motion. Once
the required height is
reached, release the knob
and slowly push the seat
downward until the pin snaps
in place. Verify that the seat is
locked in place by pulling
upward on the seat. If the seat
is properly locked, the seat
will not move up or down.
4. Turn the seat
adjustment knob
clockwise to tighten
the adjuster knob.
Completely tighten
the knob prior to use.
M
OVING
the
S
MOOTH
X
BIKE
Check that the frame is
locked in the folded
position. Tilt the bike
forward on to the front
wheels. Then roll the bike
to the new location
Fold the back pad
down
Remove the
frame locking pin
Fold the upper
portion of the
bike inward
Place the locking
pin in the first pin
hole to lock the
frame together
Summary of Contents for SMB-XBIKE
Page 16: ...16 EXPLODED DIAGRAM...