9
“
A
SSEMBLY
I
NSTRUCTIONS
”
S
TEP
10
–
Console
Bracket Assembly
CAUTION:
Be careful not to
damage the
Middle Pulse Sensor
Wire (112)
while assembling
STEP 9
.
Slide the
Console Bracket (18)
onto
the
Upright Post (4)
as the
FIG1
illustration shows on the top right
corner.
S
TEP
11
–
Console Fixed
Bracket Assembly
NOTE:
For shipping purpose, the
4 x
Button Head Bolts (M8xp1.25x12mm)
(87)
and
4 x Lock Washers (M8)(66)
are attached on the
Upright Post (4).
a. Remove the
4 x Button Head Bolts (M8xp1.25x12mm)(87)
and
4 x Lock Washers (M8)(66)
from the
Upright Post
(4).
b. Attach the
Console Fixed Bracket (43)
onto the
Upright Post (4)
and secure with the
4 x Button Head Bolts
(M8xp1.25x12mm)(87)
and
4 x Lock Washers (M8)(66)
S
TEP
12
–
Stationary Handlebar & Wire Assembly
NOTE:
For shipping purpose, the
Button Head Bolts (M8xp1.25x16mm)(88)
and
Lock Washers (M8)(66)
are attached
on the
Stationary Handlebar (5).
a. Remove the
4 x
Button Head Bolts (M8xp1.25x16mm)(88)
and
4 x Lock Washers (M8)(66)
from the
Stationary
Handlebar (5).
b. Connect the
Middle Pulse Sensor Wire (112)
and the
Lower Pulse Sensor Wire (113)
to the
Stationary
Handlebar (5).
c. Insert the
Stationary Handlebar (5)
into the
Upright Post (4)
and secure with the
4 x
Button
Head Bolts (M8xp1.25x16mm)(88)
and
4 x Lock Washers (M8)(66).
NOTE:
After connecting the wires
’ pins, slightly and gently pull two sides of wires to test and
make sure whether the wires are fully connected.
Summary of Contents for CE-8.0LC
Page 33: ...33 PRODUCT PARTS DRAWING ...
Page 37: ...37 ...