20
9.35HR TREADMILL
ASSEMBLY
STEP 3
:
ASSEMBLE THE SIDE HANDLEBARS
NOTE: SIDE RAILS ARE INTERCHANGEABLE FOR USE IN BOTH RIGHT AND
LEFT SIDES. MAKE SURE ALL WIRES RECESSED INTO THE FRAME. DO
NOT TRAP OR PINCH.
(A) Connect the Left Motion Control lower wire to the middle wire (207 to 309). As
Shown in the diagram below.
(B) Insert the Left Handlebar (201) into the Upright Tube (301). Using one M8x16mm
Bolt (804) to secure the upper portion. Use two M8x50mm Bolts (805) to secure
the lower portion to the base frame, and use two M8x50mm Bolts (805) to secure
the middle portion to the upright.
(C) Repeat the above process for the Right side.
804
X2
805
X8
207
309
Summary of Contents for 9.35HR
Page 11: ...www smoothfitness com 11 PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE ASSEMBLED ...
Page 12: ...12 9 35HR TREADMILL PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE ASSEMBLED ...
Page 14: ...14 9 35HR TREADMILL PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE ASSEMBLED ...
