Page 14
To Review / Change a Program:
1.
Begin with the treadbelt stopped. If necessary, press and release the
[START BELT]
key to light the display.
2.
Press
[SELECT]
as many times as necessary to toggle the display to the desired
program.
Note:
You may choose to edit either the pre-programmed workouts (first in the
displayed series) or the user-defined workouts (second in the displayed series), but
only changes to the user-defined workouts will be saved after the unit is turned off.
3.
Use the
[SPEED +/-]
and
[I/-]
keys to adjust the speed and incline of the
first workout segment.
4.
Press the
[SHIFT >]
(shift right) key to advance to the next segment. As each
segment is selected, a blinking light will indicate the segment being edited.
5.
Repeat steps 3 & 4 above until all 10 segments are programmed.
6.
Press
[START BELT]
to begin your workout and save the program.
NOTE:
During your workout, you may adjust the speed and incline at any time. Any
changes made while the belt is moving will not be saved with the program.
To Erase a User Defined Program:
1.
Press
[SELECT]
as many times as necessary to toggle the display to the program
to be deleted.
2.
Press and hold both
[SHIFT]
keys at the same time for 3 seconds. The program
will be cleared.