Page 11
Odometer / Hour Meter:
When the tether cord is initially placed in operational position the dot matrix window will
display
HOUR
and other windows will indicate total
time
(hour) of treadmill use. This data
will stay on a few seconds and change to an
odometer
. Display will then blank out.
The left hand window indicates upper computer software version. This is a service
issue to refer to computer software design.
To Turn Treadmill Off:
Two methods accomplish this:
~
Press and release red
Stop/Pause
switch twice (once after Pause mode). Display
will blank out and treadmill will slow to a stop.
~
Pull tether cord. Use tether cord only in a panic situation or to secure the treadmill.
Operating Features -
continued
