6. POSITIONING THE DOOR HANDLE
Align the holes in the Left Door (38) with the holes in the Handle (47). Place a (018*06.5*2.0mm) Gasket (54) on each
1/4-20"1/2 Hexagon Bolt (53) and tight with Wrench. Repeat the former step to assemble the Right Door (46).
As shown in FIG9
8. POSITIONING THE HEAT BA FFLE:
Position The Heat Baffle (5) on the locating brackets which is on the inside walls of the Grill. The notched legs should be
facing downward. As shown in FIG11, FIG12
ALLIGN WITH
SLOTS AND INSERT
TO HOLD IN PLACE
7. POSITIONING THE DOOR:
FIG9
1. Take the Right Door (46) with handle assemble. First insert the Bottom Pivot (37) into the small hole on
Platform (50). Then pull down the pivot until the upper end is aligned with top edge of the door. Then align the pivot
with the upper hole and pull up the pivot to to secure the door.
2. Repeat Step 1 to secure the Left Door (38) . Make a proper adjustment until the doors can be firmly closed. As shown in
FIG10
FIG10
FIG11
9. POSITIONING THE GREA SE DRA IN PAN:
Position The Grease Drain Pan (6) over the Firepot. The notched legs of the Grease Drain Pan should be
facing downward to fit onto the locating brackets so that the grease can flow into the Grease Drain Tube.
As shown in FIG13
FIG12
FIG13
