Smoke hollow LS2016-2B, Owner'S Manual

Page: 17 / 21

Grill Assembly
Locate:
• (4) Heat Tents
• Warming Rack
• (2) Cooking Grids
• (2) 5
/
32
”
–30 x .63
”
bolts
• Grease Pan
• Grease Cup
• Grease Cup Wire Holder
Heat Tent
Assembly
Lay Heat Tents over
the Burners here. They
should sit into the shelves
on the front and back of
the Barrel Base.
Cooking Grids and Warming
Rack Assembly
Place Cooking Grids over the Heat Tents
as shown. Attach the Warming Rack to the
Barrel Lid as shown with (2) 5
/
32
”
–30 x .63
”
bolts. Place Warming Rack Front Legs into
the holes on the sides of the Barrel Base.
Note: Some models may not have a Warming Rack.
Grease Pan Assembly
Place Grease Cup Wire through hole
in bottom of Grease Pan as shown.
Insert Grease Cup into Grease Cup
Wire Support. From the back of the
Grill, position the Grease Pan as shown
so that the slots of the Grease Pan are
positioned over the tabs on the left
Grease Pan Brace and the tab on the
Grease Pan is positioned through the
slot on the right Grease Pan Brace.
13. Final Assembly
17