Smoker Assembly
Rear Damper
Smoker Assembly
Hardware Needed:
(1) #10-24x3/8” Screws
(1) #10 Lock Nuts
STEP 7:
Attach Damper to the back of the
Cabinet as shown here.
Hardware Needed:
(6) M4x7mm Tapping Screws
(2) 1/4-20x1/2” Screws
STEP 8:
Insert Heat Element into the bottom of
the Cabinet and place end through hole
in right side of Cabinet and attach with (2)
1/4-20x1/2” Screws as shown (Fig. 8A).
Then secure the Heat Element to the
Cabinet with (3) Heat Element Fixing
Clamps and (6) M4x7mm Tapping Screws
as shown (Fig. 8B).
Fig. 8B
Fig. 8A
Heat Element
Heat Element
Fixing Clamps
10
