J
2009-07
WW1924-ADD7 REV 0
Manufactured By: Smiths Medical PM, Inc.
N7W22025 Johnson Drive
Waukesha, Wisconsin 53186
Phone: 1-262-542-3100
Toll-Free: (U.S.A. only) 1-800-558-2345
Fax: 1-262-542-0718
www.smiths-medical.com
©2009 Smiths Medical Family of companies. All rights reserved.
BCI, SPECTRO
2
, and the Smiths design mark are trademarks of the Smiths Medical family of companies.
The symbol
®
indicates the trademark is registered in the U.S. Patent and Trademark Office and certain
other countries.
H
Page 4 of 4
Changing the Batteries or Battery Pack
To install or replace batteries, first turn the unit off, then depress the battery compartment door at center of back
1.
of oximeter (Horizontally scored tab) and slide door off towards bottom of oximeter.
If using “AA” (LR6) batteries, place the negative end of battery first, compressing the negative terminal spring and
2.
gently push the positive end until it contacts the positive tab.
If using the rechargeable lithium-ion battery pack (WW1090), align the battery pack so that its metal connectors
3.
line up with the corresponding connectors in the battery compartment. Push battery pack into place.
Replace battery door by sliding it back into place until the latch clicks.
4.
Attaching the Sensor Cradle
The WW1030 comes with three sensor cradles for storing and protecting the sensor when not in use. The cradles and their
packaging are number coded for the particular sensor they hold:
1— fits BCI® pediatric size sensors
•
2— fits the BCI® Comfort Clip® sensor
•
3— fits BCI® adult size sensors
•
Insert the appropriate sensor cradle into the recess in the upper right backside of the oximeter, curved end down and
numbered side out. Push lightly until cradle snaps into place. After monitoring, insert the sensor into the cradle, cabled
end upward.
f
Attention, see operation manual for warnings, cautions, notes and additional instructions for use.
Quick Reference Guide
WW1030
