Smiths Medical BCI 3304, Service Manual

Page: 18 / 36

Chapter 1: Introduction
1-6 3304 Service Manual
WARnIng! When connecting this monitor to any instrument,
verify proper operation before clinical use. Refer to
the instrument’s user manual for full instructions.
Accessory equipment connected to the monitor’s data
interface must be certified according to the respective
IeC standards, i.e., IeC 60950 for data processing
equipment or IeC 601-1 for electromedical equipment.
All combinations of equipment must be in compliance
with IeC 601-1 systems requirements. Anyone
connecting additional equipment to the signal input
port or the signal output port configures a medical
system, and therefore is responsible that the system
complies with the requirements of the system standard
IeC 601-1.
WARnIng! IeC 60950 approved equipment must be placed outside
the “patient environment.” The patient environment is
defined as an area 1.5 m (4.92 feet) from the patient.
Figure 1.1: Patient Environment
WARnIng! Disconnect the AC power supply from the outlet before
disconnecting it from the monitor. Leaving the AC
power supply connected to an AC power outlet without
being connected to the monitor may result in a safety
hazard.
WARnIng! Do not allow any moisture to touch the AC power
supply connectors or a safety hazard may result.
ensure that hands are thoroughly dry before handling
the AC power supply.
R 1.5 m (4.9 f
t.)