12 | SmithsEP.co.uk | Issue 001 - September 2018
Technical Documentation waterfan HEATER
v201803
SETTINGS MENU
•
When Panel Intelligent is switched off, press and
hold MODE for 3 seconds.
•
To change option use MODE button.
•
To change value use +/- buttons.
Setting
menu
Option
Value
1
Temperature
calibration
–9°C ~ +9°C
2
Fan status
C1: Thermostatic mode
C2: Continuous mode
3
Temperature
sensor
0: Internal Sensor
1: External Sensor NTC
4
Antifreeze
0: Off
1: On
5
Antifreeze
range
+5°C ~ +10°C
6
Modbus ID
1~247 (01~F7)
BUTTON LOCK/UNLOCK
•
To LOCK buttons press and hold + and then – and
hold both of them for 5 seconds.
•
To UNLOCK buttons press and hold + and then –
and hold both of them for 5 seconds.
CLOCK SETTING
•
When controller is turned off, press and hold FAN
button for 3 seconds and enter time clock setting.
•
Option sequence as follows: hour, minute weekday.
•
To change option use FAN button
•
To change value use + and – buttons.
PROGRAMING
Setting mode
•
Push shortly MODE button (15) to select Manual
Mode or Programmable Mode.
•
Push MODE button (15) for 3 seconds and select
Cooling Mode, Heating Mode or Ventilation Mode.
Setting of fan speed
•
Push FAN button (16) for 3 seconds to select fan
speed LOW, MID, HIGH , AUTO
Weekly thermostat
•
Push FAN button (16) for 3 seconds and program
time, setpoints and time zones accordingly.
Monday to Friday – all settings will be the same for
each day between Monday and Friday
•
1st time zone setting (Hour and Minute) –> FAN–>
1st time zone status ON or OFF –> FAN–>, 1st
time zone temperature setting –> FAN–> …..6th
time setting (Hour and Minute) –> FAN–>, .. the
same procedure for each time zone (max 6 zones)
It is possible to set up individual time zone setting
separately for
Saturday and Sunday
on basis of above
procedure.
EXAMPLE SETTINGS of WEEKLY THERMOSTAT
Mon-Fri
Saturday
Sunday
S
N
S
N
S
N
1
06:00 ~ 08:00 ON
17°C ON 17°C ON 17°C
2
08:00 ~ 11:30 ON
20°C ON 17°C ON 17°C
3
11:30 ~ 13:30 ON
20°C ON 17°C ON 17°C
4
13:30 ~ 17:00 ON
20°C ON 17°C ON 17°C
5
17:00 ~ 22:00 ON
17°C ON 17°C ON
17°C
6
22:00 ~ 06:00 ON
15°C ON 15°C ON
15°C
1-6 available time zones
S1 : Status; N: Setpoint
Remarks
During setting, displays can be set while they are flickering.
When the beginning time is flickering, it is able to be set (10
mins each step) via scr/- buttons. The time setting is
the beginning of current time zone, also the end time of last
time zone
When ON/OFF is flickering, it is able to be set via scr/ -
buttons. When status in ON, thermostat will run according to
setpoint ; when status is OFF, thermostat will be switch off.
When the setpoint is flickering , it is able to be set via scrolling
+/ - buttons. Even choosing OFF status, setpoint is able to
set. And this setpoint will be the working if someone switch
thermostat ON manually this time; however in next time zone,
it will run according to automatic programmable setting.
ELECTRICAL CONNECTION SCHEME
WARNING!
RISK OF ELECRICAL SHOCK. Disconnect power supply
before making any electrical connections. Contact with
components carrying hazardous voltage can cause
electrical shock and may result in severe personal injury
