2 | SmithsEP.co.uk | Issue 001 - September 2018
Technical Documentation waterfan HEATER
v201803
1.
INTRODUCTION
HEATER heating and ventilation devices are designed to be applied in the buildings of small and medium capacity,
especially such as: production and warehouse halls, car showrooms and service stations, sports halls and stadiums, sacral
buildings and churches, retail stores and wholesales outlets, agricultural facilities, exhibition surfaces.
2. DIMENSION AND BASIC TECHNICAL PARAMETERS
Basic elements of HEATER devices :
Casing made of highly resistant EPP (expended polyprophylene) material
Regulated air–conduits
Installation bracket
3 step axial fan 450 mm dimension; fan is protected from direct access to revolving elements with safety netting
Heat exchanger – (Cu/AL) made of copper tubes placed in an aluminum lamellar exchanger /block with stub
connection ½’, ¾”.Stub connections are equipped with air-release valves and heat outlet vent.
*for temperatures of 90/70 and inlet temperature of O˚C
**maximum height of assembly for vertical airflow, max working range of up to 380m². Horizontal range of isothermal stream at
velocity boundary/speed limit of 0,5 m/s
***measurement obtained when 5 m away from the device
