9
Introduction
CONTROLS & INSTRUMENTS
Q. Spray Boss Control - Engages and disengages speed boss. Forward is
engage and all the way back is disengage. When the lever is engaged it
sets a stop for the accelerator. The accelerator pedal must be used to
maintain this speed. To adjust speed use the knob on the end of the lever,
counter clockwise increases speed and clockwise decreases speed.
Disengage the lever and you will have full accelerator pedal range.
R. Cup Holder - Holds standard cup.
S. Ground Speed (Cruise) Control Foot Switch - When rocker switch is
truned on and desired speed is obtained, push foot speed control switch
to set cruise.
T. Master Boom Switch - is used to override the master switch on the
computer console of the spray systems.
U. Reverse / Accelerator Pedal - This pedal controls ground speed. Press
pedal to increase speed. Varying the amount of movement of the pedal
will vary the ground speed. To activate Reverse, you lift up on the pedal
with you toe.
When pedals are released the hydrostatic transmission centers and
stops the vehicle with a braking action.
MASTER BOOM SWITCH
The master boom switch (T), located on the left floorboard is used to override the master switch on the computer
console of the spray systems. By pushing down it will turn on/off the booms. For the 440 System the Master
Switch on the computer must be off for the master boom control switch to work.
GROUND SPEED CONTROL
The ground speed control does not work
the same as an automotive type cruise.
The ground speed control is located on
the center floorboard and is used to lock
forward speed.
TO ENGAGE:
1. Flip rocker switch ‘On’ (green
light).
2. Obtain desired speed with foot
pedal.
3. Step on foot switch to lock speed.
4. Push foot switch again to disen-
gage.
To avoid abrupt stop, place foot on traction pedal before disengaging speed control.
Summary of Contents for spray star 1008
Page 39: ...37 Reference ...
