Smith SPS8, User Manual & Parts List

Page: 15 / 33

SMITH Manufacturing 1-954-941-9744 www.SmithMfg.com 1/2009 15
CARBIDE FLAIL CUTTER SET-UP
Note: The following diagrams are intended to guide you trough general cutter set-ups.
Quantities of Cutters and Spacers may vary, depending on the finish you desire.
CF2616™ CF2618™
Placing more cutters on each shaft will provide a smoother finish. Adding spacers will
give a more coarse finish. Aligning the cutters will create a groove pattern.
CF2516™ CF2515™
GROOVE FINISH GENERAL FINISH
Align Cutters and Spacers 90 CUTTERS (approx.)
2 Spacers per Cutter
FINE FINISH SUPER-FINE FINISH
114 CUTTERS (approx.) 160 CUTTERS (approx.)
1 Spacer per Cutter 0 Spacers
Flip charts upside-down for set-up of other side of drum.
STEEL CUTTER SET-UP
SUPER-FINE FINISH 456 Steel Cutters
(Note: Quantity of Cutters may vary)
HS1008™ HS1000™
Bushed Drum Drum
P/N: 65050 P/N: 65051
Offset with
spacers to
prevent
grooving.
Drum
P/N: 65051
Bushed Drum
P/N: 65050
SPS8