SPS8
SMITH Manufacturing 1-800-653-9311 www.SmithMfg.com
14
1/2009
SPECIAL TUNGSTEN CARBIDE MILLING SCRAPER
CM2535™ CM2150™
CUTTER SET-UP
(Note: Quntity of Scrapers may vary).
Bushed Drum
P/N: 65050
Flip Charts upside-down for set-up of other three shafts.
Drum
P/N: 65051
MILLING SCRAPER USE INSTRUCTIONS:
Milling scrapers (CM2150™) are not made for cutting into portland cement surfaces. They are made
for removing materials in or on soft asphalt or removing thick film coatings on top of smooth concrete
surfaces only. If you need to cut concrete, please use SMITH’s Ultra-Premium tungsten carbide spike
cutters (CF2616™ and CF2618™). Make certain the special milling scrapers re loaded on the drum
in the proper direction, whereby the leading carbide edge will cut first. Loading the scrapers back
-
wards will damage the cutters and the drum.
USE A FORWARD DIRECTION ONLY.
