SMITH Manufacturing 1-954-941-9744 www.SmithMfg.com
LNX8
VERSION 2/2017
SMITH Manufacturing 1-954-941-9744 www.SmithMfg.com
MaINtENaNcE chEck LIst
Note:
Make sure the Starter Box is in the
off
position, and the plug is disconnected
from any power source before servicing
• Grease the tilt lever, lower linkage. (Clean dirt off of fittings before greasing.)
• Check the Drive belt for wear, and adjust (tighten), or replace as required.
• Check that the pulleys are aligned properly to ensure the Drive belt is running true.
• Check wheel for wear and that they are rotating properly, replace if worn. Clean wheels
of material build-up.
• The inside housing must be clean, and remove any build-up from inside the cage so
spindle rotate freely.
• Check all fasteners and re-tighten, since the machine will vibrate the fasteners loose if they
are not secured. Use locktight.
• Every 40 hours of operation grease the two front axle bearings
10
