Step 7: (OPTIONAL) If you used the wall stabilizers and have place the Power Bar up against a wall, then you
can attach the worksurface to the wall using the included wall mounting brackets for added stability. Attach to
wall per local requirements.
Notes:
If you have damaged or missing components or hardware or need assistance in assembling product, please
contact Customer Service at 1-800-328-1061.
Step 5: With help,
over to the upright position and place the included power domes into the holes
in the work surface using the provided instruction. Once the domes are installed, route the plugs through the UXL
wire manager leg if desired.
Step 6: Using attached cable ties, neatly tie up the cables in bundles under the table.
