Step 1: Locate all parts needed for assembly. Place the table laminate face down on a clean, dry surface
Step 2: At each corner, attach a leg using the supplied Bolts and 5mm Allen Key.
(B) The legs are bolted on from Inside the Table Frame; place the bolts into the Bolt Holes
as shown in Image (2B).
(A) Start by lining up the bolt holes on the leg and the frame as shown in Image (2A).
(C) Using the 5mm Allen Key; tighten the bolts by hand as tight as you can (see Image (2C)).
(2A)
(2B)
(2C)
(2D)
(D) With the bolts Hand-Tightened; use a Vice Grip or Wrench to compltely tighten
the bolts. (See Image (2D)).
Step 4: Fasten the Power Strip to the inside of the frame.
(B) Insert the drop-in nuts into the frame rail as shown.
(D) Fasten the drop-in nut to the frame rail using a phillips head screwdriver.
Notes:
If you have damaged or missing components or hardware or need assistance in assembling product, please
contact Customer Service at 1-800-328-1061.
(4A)
(4B)
(4C)
(4D)
Step 3: Place the Leg Stabilizers (Wall or Island) onto the bottom of the UXL legs and use the M8x25 countersunk
screws provided to fasten the stabilizers to the legs.
Wall Stabilizer
Island Stabilizer
then partially thread the screw with washer into the drop-in nut with beveled side of nut facing away ftom screw.
