For assistance in assembling product, missing or damaged parts, or to place an order, please contact customer
service at 800-328-1061.
You may also place your order online at
Form #179977
04/2018
Step 8:
Carefully place the Table back down on the floor.
Step 9:
Check the level of the Top using a level or measure
the distance
from each corner of the
top
to the floor
with a tape measure.
Step 10:
If necessary, adjust the level of the Top using the two screws on the Leg Plate.
Step 11:
To Lower the side closest to You (handle side):
Loosen (turn counter-clockwise) the Screw farthest away from you ½ turn and Tighten (turn
clockwise) the Screw closest to you. Do this for both Legs. (1/2 turn will adjust approximately 0.5
degrees).
To Raise the side closest to You (handle side):
Loosen (turn counter-clockwise) the Screw closest to you ½ turn and Tighten (turn clockwise)
the Screw farthest away from you. Do this for both Legs. (1/2 turn will adjust approximately 0.5
degrees).
Step 12:
Recheck the level of the Top using the level or tape measure and repeat Step 11 if needed. If
level at this point skip to Step 14.
LEG
PLATE
